aDriv4 website!

Linux premium238.web-hosting.com 4.18.0-553.54.1.lve.el8.x86_64 #1 SMP Wed Jun 4 13:01:13 UTC 2025 x86_64
LiteSpeed
66.29.146.195

php-fpm.conf.default

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/opt/alt/php84). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
;pid = run/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; into a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
;error_log = log/php-fpm.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; Log limit on number of characters in the single line (log entry). If the
; line is over the limit, it is wrapped on multiple lines. The limit is for
; all logged characters including message prefix and suffix if present. However
; the new line character does not count into it as it is present only when
; logging to a file descriptor. It means the new line character is not present
; when logging to syslog.
; Default Value: 1024
;log_limit = 4096

; Log buffering specifies if the log line is buffered which means that the
; line is written in a single write operation. If the value is false, then the
; data is written directly into the file descriptor. It is an experimental
; option that can potentially improve logging performance and memory usage
; for some heavy logging scenarios. This option is ignored if logging to syslog
; as it has to be always buffered.
; Default value: yes
;log_buffering = no

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been designed to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lowest priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is built with systemd integration, specify the interval,
; in seconds, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /opt/alt/php84 otherwise
include=/opt/alt/php84/etc/php-fpm.d/*.conf

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2025-09-13 09:00:43
..	dir	-	root/root	0755	2024-12-11 08:34:55
mariadb1011	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb102	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb103	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb104	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb105	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb106	dir	-	root/root	0755	2025-09-13 09:01:02
mariadb1104	dir	-	root/root	0755	2025-09-13 09:01:02
mysql5.6	dir	-	root/root	0755	2025-09-13 09:01:02
mysql5.7	dir	-	root/root	0755	2025-09-13 09:01:03
mysql8.0	dir	-	root/root	0755	2025-09-13 09:01:03
mysql8.4	dir	-	root/root	0755	2025-09-13 09:01:03
newrelic	dir	-	root/root	0755	2025-04-01 09:20:10
pear	dir	-	root/root	0755	2025-05-12 06:10:54
php-fpm.d	dir	-	root/linksafe	0755	2025-09-13 09:00:43
php.d	dir	-	root/linksafe	0755	2025-08-27 07:26:52
php.d.all	dir	-	root/linksafe	0755	2025-08-27 07:26:52
rpm	dir	-	root/root	0755	2024-12-11 08:37:01
sysconfig	dir	-	root/root	0755	2025-07-31 09:04:15
newrelic.xml	text/xml	1.23 KB	root/linksafe	0644	2025-07-10 11:56:01
pear.conf	text/plain	1.15 KB	root/root	0644	2025-05-12 06:10:54
php-fpm.conf.default	text/plain	5.19 KB	root/linksafe	0644	2025-08-27 07:26:32
php-fpm.conf.plesk	text/plain	3.96 KB	root/linksafe	0644	2025-08-27 07:26:52
php.ini	text/plain	59.95 KB	root/linksafe	0644	2025-10-02 09:04:47

For more Private tool come to me!

https://t.me/aDriv4vz